Floor conveyor

This conveyor system usually use for the products which are weight under 50KG and can not easily be hanged on the overhead conveyor

On a floor conveyor the products are transported continuous through the finishing system, without possibility to change track.

Function

The products to be painted are hanged from the chain in suitable jigs; one or more driving units pull them through the finishing system.

The number of driving units needed depends on the maximum load of the conveyor and the geometry of the overall layout of the finishing system.

In order to compensate for heat expansion and wear the system are equipped with pneumatic expansion units.

Application & use

Floor conveyor system is used for the bumper, wheel, bottle etc. coating line.

DELI COATING will advise the optimal choice of equipment for the production in question.

and other help for the operators.

DELI COATING will advise the optimal choice of equipment for the production in question.

and other help for the operators.

Construction

For each link in the chain a product or product part can be hanged or a fixture can be mounted.

The product could be rotated when it go through the designated area.

One or more driving units pull the chain, they are constructed to transmit maximum power to the chain and give a minimum abrasion.

The speed of the chain can be regulated stepless by means of a frequency inverter. A pneumatic tensioning device keep the chain tense.